Scoil: Mungraid (B.) Luimneach (uimhir rolla 14409)
- Suíomh:
- Mungairit, Co. Luimnigh
- Múinteoir: Mrs B. Mulroy
![Bailiúchán na Scol, Imleabhar 0528, Leathanach 075](https://doras.gaois.ie/cbes/CBES_0528%2FCBES_0528_075.jpg?width=1600&quality=85)
Tagairt chartlainne
Bailiúchán na Scol, Imleabhar 0528, Leathanach 075
Íomhá agus sonraí © Cnuasach Bhéaloideas Éireann, UCD.
Féach sonraí cóipchirt.
ÍoslódáilSonraí oscailte
Ar fáil faoin gceadúnas Creative Commons Attribution 4.0 International (CC BY 4.0)
- XML Scoil: Mungraid (B.) Luimneach
- XML Leathanach 075
- XML “Spinning”
Nóta: Ní fada go mbeidh Comhéadan Feidhmchláir XML dúchas.ie dímholta agus API úrnua cuimsitheach JSON ar fáil. Coimeád súil ar an suíomh seo le haghaidh breis eolais.
Ar an leathanach seo
- (ar lean ón leathanach roimhe)The spinning wheel consisted of a stool of wood about four and a half feet long nine inches wide and two inches thick On one end was a wooden pillar which supported the wheel. The wheel was entirely made from wood and the rim about four inches wide and a quarter inch in thickness was also of wood of a flexible nature. On the other end of the stool were two light pillars made from wood with two holes on the upper end of each. Each of these holes were rests for the spindle and were called ears. Those spindle ears consisted of three plaits of fresh hay woven together and could be easily replaced. They were made fast by wooden wedges. The spindle about fourteen inches long was made from ash wood. It measured in the middle about an inch in diameter and tapered to a point at one end. The other end was placed in a furl. This furl had three drills to hold a band made of woollen threads woven together. The band was placed in one of the drills of the furl and put round the big wheel to connect it with the spindleThe wheel is now ready to work
- Faisnéiseoir
- Mrs Mac Namara
- Inscne
- Baineann
- Seoladh
- Mungairit, Co. Luimnigh